Receiving Documents
Fax / Tel Auto Switching Mode
When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.
Setting the Fax / Tel Auto Switching Mode
1
Operation of Fax / Tel Auto Switching Mode
If it is a Fax call,
1
2
If it is a Voice call,
1
2
3
4
NOTE
68
Change Fax Parameter No. 17 (RECEIVE MODE) to 3: FAX/TEL SW.
(See page 38)
Your machine will answer the call when a call is received,
and then distinguish whether it is a voice or fax call.
Your machine begins to receive the documents.
Your machine will answer the call when a call is received,
and then distinguish whether it is a voice or fax call.
Your machine begins to signal (ringing) through the
machine's speaker for your attention. (See Note 1)
Lift the handset of the External Telephone and press
.
Sto p
Begin the conversation.
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL
TIMER) (See page 39).
2. To adjust the Ringer Volume refer to page 25.