Preparing To Be Polled - Panasonic UF-4500 Operating Instructions Manual

Preparing to be Polled

In order to let other stations poll your machine, you must prepare your machine with a document stored in
memory. Be sure to set the polling password before storing the document into memory. After being polled,
the documents stored in the memory will be delete automatically. To retain the documents in memory so
that they can be polled repeatedly change Fax Parameter No. 27 (POLLED FILE SAVE) to "VALID".
(See page 39)
1
Set document(s) face up.
2
3
2
4
Enter a 4-digit polling password. (See Note 3)
Ex:
4 3 2 1
5
The document(s) will be stored into the memory.
1. You can still send or receive documents even when the unit is set for polling.
NOTE
2. Only 1 polled file can be stored in the memory. If you need to add document(s) into the same
polled file. (See page 91)
3. If you have set the polling password in Fax Parameter No. 26, the password will appear on the
display.
You can still change the password temporarily by overwriting it with a new one.
(See page
3
)
39
Polling
ENTER STATION(S)
THEN PRESS START
POLLING NO.=
1:POLL 2:POLLED
POLLED
PASSWORD= 234
POLLED
PASSWORD=4321
* STORE * NO.015
PAGES=001 01%
COMPLETED
TOTAL PAGES=005
79