Fax / Tel Auto Switching Mode - Panasonic Panafax UF-4100 Operating Instructions Manual

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.
Setting the Fax / Tel Auto Switching Mode
1
Change Fax Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel
SW. (See page 33)
Operation of Fax / Tel Auto Switching Mode
If it is a Fax call,
1
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
2
Your machine begins to receive the documents.
If it is a Voice call,
1
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
2
Your machine begins to signal (ringing) through the
machine's speaker for your attention. (See Note 1)
3
Lift the handset of the External Telephone and press
STOP
4
Begin the
1 The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL
NOTE
TIMER). (See page 33)
2 To adjust the Ringer Volume refer to page 21.
.
conversation.
Receiving Documents
59