Access Code
General Description
The Access Code prevents an unauthorized user from operating the machine. Once a 8-digit Access Code
is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Access Code does not affect the use of the machine in any other way.
Setting the Access Code
1
2
4
3
Enter the Key Operator Password (The factory default
password is 00000000.) and press
4
3
5
Enter a 8-digit Access Code.
Ex:
1 2 3 4
6
7
NOTE
1. To delete the Access Code, enter the Access Code and press
procedure above to step 4, then press
7
8
5 6 7 8
.
Set
,
and
Clear
Set
SET MODE
(1-8)
∨∧
ENTER NO. OR
KEY OPERATOR ID
ENTER ID=
FAX PARAMETERS
NO.=
(01-169)
ACCESS CODE?
ACCESS CODE?
12345678
and follow the
Set
.
Sto p
93