Fax / Tel Auto Switching Mode - Panasonic Panafax UF-6000 Operating Instructions Manual

Receiving Documents

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.
Setting the Fax / Tel Auto Switching Mode
1
Operation of Fax / Tel Auto Switching Mode
If it is a Fax call,
1
2
If it is a Voice call,
1
2
3
4
NOTE
64
Change Fax Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel SW.
(See page 36)
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
Your machine begins to receive the documents.
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
Your machine begins to signal (Ringing) through the
machine's speaker for your attention. (See Note 1)
Lift the handset of the External Telephone and press
.
STOP
Begin the conversation.
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL
TIMER) (See page 37).
2. To adjust the Ringer Volume refer to page 25.