Panasonic UF-4500 Operating Instructions Manual page 40

Customizing Your Machine
Fax Parameter Table
No. Parameter
37 RCV TO MEMORY
38 ACCESS CODE
39 PIN CODE ACCESS
42 CONF. FILE SAVE
43 PASSWORD-XMT
44 PASSWORD-RCV
46 SELECT RCV
47 REMOTE RCV
51 REMOTE DIAG.
52 DIAG. PASSWORD
53 SUB-ADDR PSWD
54 FAX FORWARD
56 COVER SHEET
58 LANGUAGE
63 PC-FAX RCV MODE
(For UF-5500 only)
68 DIAL TONE CHECK
40
Setting
Setting
Number
(----)
(----)
1 NONE
2 SUFFIX
3 PREFIX
1 INVALID
2 VALID
1 OFF
2 ON
1 OFF
2 ON
1 INVALID
2 VALID
1 INVALID
2 VALID
1 INVALID
2 VALID
(----)
(----)
1 INVALID
2 VALID
1 OFF
2 ON
1 A-ENGLISH Selecting the language to be shown on the display and
2 C-FRENCH
3 SPANISH
1 PRINT
2 UPLD&PRT
3 UPLOAD
1 INVALID
2 VALID
Comments
Enter a 8-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to ON, this parameter will not be shown
on the LCD display. (See page 95)
Enter a 8-digit Access Code to secure the machine from
unauthorized use. (See page 93)
Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 106)
Selecting whether the machine saves the confidential
polled file even after the file is polled once.
Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting. (See page 124)
Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 125)
Selecting whether the machine performs selective
reception. (See page 122)
Selecting whether or not the machine accepts remote
reception command. (See page 67)
Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
Setting a 20-digit password for secured sub-address
communication.
Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 108)
Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 104)
reports.
Selecting how the machine will execute the received Fax
document(s).
PRINT : Print the received document(s).
UPLD&PRT: Print the received document(s) and upload
it's file.
UPLOAD : Upload the received document file.
When set to "INVALID", the machine will not check the dial
tone.