Receiving Documents
04004000002
Fax / Tel Auto Switching Mode
When your machine is set to this mode, your machine will switch to document reception or voice
04004010005
communication automatically.
Setting the Fax / Tel Auto Switching Mode
04004040005
1
04004020003
04004060035
2
04004060036
Operation of Fax / Tel Auto Switching Mode
1
04004020004
04004060015
2
a
04004060048
Note:
04004070006
04004070017
60
Change Fax Parameter No. 15 (IN MODE) to 2: Fax / Tel SW. (see page 33)
OUT
Confirm that the lamp is OFF and the display is
as shown to the right.
Your machine will answer the call when a call is received, then distinguish whether it is a
voice or fax call.
If it is a Fax call,
Your machine begins to receive the
documents.
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL TIMER).
2. To adjust the Ringer Volume refer to page 21.
08–OCT-1999 15:00
RCV MODE=FAX/TEL 00%
If it is a Voice call,
2
Your machine begins to signal (ringing)
b
through the machine's speaker for your
attention. (see Note)
3
Lift fax handset and talk.
b
or
Lift the handset of the extension phone
and press
STOP
to talk.