Removing A Blank Drive Bezel - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual
Making hardware changes - compaq deskpro family of personal computers
Hide thumbs
Also See for 159715-002 - Deskpro EN - DT 6650 Model 10000:
- Maintenance and service manual (103 pages) ,
- Software reference manual (58 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
Removing a Blank Drive Bezel
4-22
Upgrading the Compaq Deskpro EN Series, Desktop Model
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock and disable the Smart Cover
Sensor.
2. Shut down the operating system properly, turn off the
computer and any external devices, then disconnect the
power cord from the electrical outlet.
3. Remove the computer cover and set it with its top down on
a protected work surface.
4. Squeeze together the sides of the right end of the
appropriate drive bezel blank to release the catches, then
remove the bezel blank.
Removing a Drive Bezel
Hide quick links:
Advertisement
Table of Contents
