Installing Drives; Installing An Optional Dvd-Rom Drive - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual
Making hardware changes - compaq deskpro family of personal computers
Hide thumbs
Also See for 159715-002 - Deskpro EN - DT 6650 Model 10000:
- Maintenance and service manual (103 pages) ,
- Software reference manual (58 pages) ,
- Hardware reference manual (48 pages)
Table of Contents
Advertisement
Installing Drives
Installing an Optional DVD-ROM Drive
3-16
Upgrading the Compaq Deskpro EN Series, Small Form Factor
The computer has two external drive bays. The first external
bay contains a preinstalled diskette drive. This section describes
how to remove the CD-ROM drive and install a DVD-ROM
drive into the second external bay.
To verify the type and size of the mass storage devices installed
in your computer, run Compaq Computer Setup. Refer to
Appendix B, "Computer Setup Utilities," for more information.
To install an optional DVD-ROM drive:
1.
Remove the CD-ROM drive if present.
2.
Install two guide screws on each side of the drive.
All screws are shoulder-head screws.
Installing Guide Screws in the DVD-ROM Drive
Hide quick links:
Advertisement
Table of Contents
