10. Remove the subpanel 1 as described in the section
"Removing Bezel Blanks" and reposition it with the bezel
blanks in the proper orientation for the minitower
configuration 2.
CAUTION:
Hold the subpanel straight when you pull it away from
the front bezel. Pulling the subpanel away at an angle could
damage the pins that align it within the front bezel.
Changing from a Desktop 1 to a Minitower Configuration 2
11. Replace the subpanel, front bezel, and the computer access
panel.
12. Reconnect the external equipment.
Making Hardware Changes
2-7