Changing from a Minitower to a Desktop Configuration
2-8
Upgrading the Compaq Deskpro EP Series
1. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power
cord from the power outlet and disconnect any external
devices.
2. Remove the computer access panel.
3. Remove the front bezel.
4. Disconnect all power and data cables from the drives in the
5.25-inch drive bays.
5. To release the drives from the 5.25-inch drive bay, press
the long (green) drivelock 2 as shown.
Activating the Drivelocks (Shown from the Rear of the Chassis)
6. While pressing the drivelock, pull the drives out of the
drive bay.