Upgrading The Compaq Deskpro En Series, Small Form Factor; Mounting The Computer; Self-Mounting Method - Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000 Configuration Manual

Mounting the
Computer

Self-Mounting Method

3
chapter
U
PGRADING THE
D EN S
ESKPRO
S F
MALL ORM
Your computer allows for easier upgrades and service with a
slide-out system board and tool-less access to most internal
components. Quick release cover latches, located on the sides of
the computer, allow easy removal of the computer cover without
the use of tools.
You can install the computer on, under, or beside your
workspace. There are three methods of installation: the self-
mounting method, the bracket mounting method, and the
drawer installation method.
A mounting bracket is an option available from Compaq.
The self-mounting method requires removing the system board.
Compaq recommends that you contact your authorized Compaq
dealer or service provider when using this installation.
CAUTION:
Do not mount the computer upside down when using
this procedure.
C
OMPAQ
,
ERIES
F
ACTOR
Making Hardware Changes 3-1