In, Out & Chapter Points From External Edit Lists - JVC BD-X200U - Dvd Authoring Recorder Instructions Manual

Synchronous Recording
In, Out & Chapter Points from External Edit Lists
When dubbing a tape edited using an external VCR or non-linear editor to a DVD, the edit list (or EDL) created during the editing
process can be used to automatically set the In Point, Out Point, and chapter marks.
Notes
Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER [2/2] MENU screen is set to
MANUAL.
The framing mode for time codes (i.e. drop or non-drop) will be matched to that of the edit list.
In order to be read, the EDL must be of CSV or Sony9100 format.
The priority sequence for loading is CSV † Sony9100 † internally-made EDL.
Chapter marks are inserted at GOP intervals (i.e., 15 frames). It will not be possible to insert chapter marks that are closer
together than this interval.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
00:00:00:00
EXIT IN POINT
: : : : : :
h m s f h m s
1 00:00:00:00 2 00:15:00:00
4 00:25:00:00 5 00:30:00:00
7 00:40:00:00 8 00:45:00:00
TC INPUT
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL LOAD
TC CANCEL EDIT/END
EDL LOAD
Example 1: Loading a CSV-format EDL
JVC CSV
IN POINT
OUT POINT
Chapter1
Chapter2
Chapter3
Chapter4
Chapter5
Line returns at the end of each line.
Maximum of 98 chapter marks.
Framing mode determined by the character in front
of the frame field.
Period (.) : Drop frames
Colon (:) : Non-drop frames
Example 2: Loading a Sony9100-format EDL
Recorder-In and Recorder-Out time codes are read from the X-source and Y-source rows, and these are then set as the
In Point, Out Point, and chapter marks for editing.
Set as the In Point
EDIT RECORDER-IN
0001 00:00:00:00
00:10:00:00
0002
0002 00:20:00:00
0003 00:30:00:00
0004 00:40:00:00
0004 00:40:00:00
00:50:00:00
0005
0005 00:50:05:00
Already set
68
OUT POINT 00:10:00:00
1.
Transfer the external edit list to your BD-X200.
: : :
f h m s f
3 00:20:00:00
6 00:35:00:00
9 00:50:00:00
2.
Select EDL LOAD from the REMOTE CONTROL screen and press
: : :
000 min the SET button.
FINALIZE
00:00:00:00
01:00:00:00
00:10:00:00
00:20:00:00
00:30:00:00
00:40:00:00
00:50:00:00
Set as chapter marks
RECORDER-OUT
00:10:00:00
00:20:00:00
00:20:00:00
00:40:00:00
00:50:00:00
00:50:00:00
01:00:00:00
01:00:00:00
Set as the
Out Point
Set as a
chapter mark
Procedure
The In Point, Out Point, and chapter marks are set in accordance with the
EDL.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT IN POINT
: : :
h m s
f
00:10:00:00
1
4
00:40:00:00
7
: : :
CHAPTER MANUAL
ADJ
8.0 Mbps
BITRATE
TC SET EDL LOAD
TC CANCEL EDIT/END
REMOTE CONTROL SCREEN ( 9PIN MASTER )
IN POINT
EXIT
: : :
h m s f
1 00:10:00:00
4 00:40:00:00
7
: : :
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps
TC SET EDL LOAD
TC CANCEL EDIT/END
00:00:00:00
OUT POINT 01:10:00:00
: : : : : :
h m s h m s
f f
00:20:00:00 00:30:00:00
2 3
5 6
00:50:00:00
: : :
8 9
: : : : : :
: : :
TC INPUT
000 min
DISC REMAIN
FINALIZE
00:00:00:00
OUT POINT 01:00:00:00
: : : : : :
h m s f h m s
2 00:20:00:00 3 00:30:00:00
5 00:50:00:00 6 00:50:05:00
8 9
: : : : : :
: : :
TC INPUT
000 min
DISC REMAIN
FINALIZE
EDL LOAD
f
EDL LOAD