JVC BD-X200U - Dvd Authoring Recorder Instructions Manual page 17

No.
2 Indication of the current operating mode
PLEASE WAIT : The DVD recorder is starting up.
OPERATE OFF : The DVD recorder is preparing to shut down.
NO DISC
LOADING
DVD-R
DVD-RW
DVD
REC PAUSE
REC STOP
MENU EDIT
EJECT
TITLE CLOSE
FINALIZE
ERASE
TOP MENU
MENU
ENCODING XX : Encoded video is being output. (XX indicates the bit rate.)
Display of the Setup Menu
Menu items and setting values from the Setup Menu are displayed. (☞ Page 74)
Event messages
Messages relating to incorrect operation and the like are displayed for approximately 3 seconds. (☞ Page 19)
Alarm messages
Alarms are displayed when the DVD recorder cannot obey a command. (☞ Page 20)
OPERATE
DVD RECORDER BD-X200
AUDIO
TITLE CHAPTER
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
TOP
PHONES REV STOP PLAY FWD PAUSE REC
MENU
TITLE
DOLBYDIGITAL
LPCM
: The DVD recorder currently contains no disc.
: A disc is being loaded into the DVD recorder.
: The current disc is a non-finalized DVD-R. (Approximately 3 seconds)
: The current disc is a non-finalized DVD-RW. (Approximately 3 seconds)
: The current disc is a finalized DVD-R or DVD-RW. (Approximately 3 seconds)
: The DVD recorder is switching from Recording mode to Recording Pause mode.
: The DVD recorder is switching from Recording mode to Stop mode.
: A title menu or chapter menu is currently being edited.
: The current disc is being ejected.
: The DVD recorder is performing title-close processing.
: The DVD recorder is finalizing the disc.
: The DVD recorder is erasing data from a DVD-RW disc.
: The disc's top menu is being played.
: A menu is being played.
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
SET
MENU
CHAP
2
Description
15