Using A Keyboard & Mouse To Control Recording - JVC BD-X200U - Dvd Authoring Recorder Instructions Manual

Using a Keyboard & Mouse to Control Recording
BD-X200 recording operations can be carried out using the REC CONTROL panel displayed on the monitor. In addition, a keyboard
and mouse can also be used when working with this panel.
VIDEO
IN LINE OUT INPUT
LEVEL
4dB
8dB
Y/C
IN
DV IN/OUT
USB
LAN
SIGNAL
GND
Print Pause
Screen Scroll
Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Lock
Sysrq Break
Back Page Num
Space Insert Home Lock /
1 2 3 4 5 6 7 8 9 0 - ^ Up
Q W E R T Y U I O P 7 8
Page
Tab Enter Delete End Down
@
Caps Lock A S D F G H J K L 4 5
; :
Z X C V B N M < > ? 1 2
Shift Shift
,
. / /
0
Ctrl Alt Alt Ctrl
REMOTE MENU screen
REMOTE MENU
MENU
REMOTE SELECT
REC CONTROL
REM FF/REW MODE
04/05/04
11:20:00
REC CONTROL panel
Notes
DISC TITLE from the REC CONTROL
panel can be selected to allow a name
to be input for the disc. This type of
name proves useful when managing
discs using a PC. Note that disc names
are not displayed on the monitor or the
DVD recorder.
Characters allowed for the disc title are
alphanumerical characters and
underscore (_) only. Space and other
symbols may not be used.
FINALIZE and DISC TITLE from the
REC CONTROL panel cannot be used
while recording.
The Record (r) button from the REC
CONTROL panel can be activated or
clicked to insert chapter marks and
thumbnails during recording.
AUDIO
CH1 Signal Connections
IN OUT
Connect a keyboard and mouse to the USB terminals on the back of the DVD
CH2
REMOTE
recorder.
DC 19V
If the REC CONTROL panel is to be displayed on-screen, set REC CONTROL
from the REMOTE MENU screen to ON.
This panel will be displayed in Stop, Recording, and Recording Pause mode.
-
*
9
To open the Setup Menu, press the DVD recorder's SET UP button. It is not
+
6
Enter
.
possible to open this screen using the keyboard or mouse.
1.
9PIN(MASTER)
ON
FF/REW
2.
000 min
3.
Restart recording.
Steps 2 and 3 can be repeated to create a single, partitioned title.
REC
4.
End recording (i.e., close the title)
TITLE 1 0:11:22
CHAPTER 1 0:11:22
If additional recording is to be carried out, repeat steps 1 through 4
above.
5.
End recording and remove the disc.
Settings
Procedure
Start recording.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select Record (r)
from the REC CONTROL panel, and then press the Enter key.
Mouse : Move the mouse pointer to the Record (r) button and left click
while the Record button selected.
Pause recording.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select Pause (w) from
the REC CONTROL panel, and then press the Enter key.
Mouse : Move the mouse pointer to the Pause (w) button and left click
while the Pause button is selected.
The DVD recorder will adopt Recording Pause mode; in addition, a chapter
mark and thumbnail will be inserted at the current position.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select either Record
(r) or Pause (w) from the REC CONTROL panel, and then
press the Enter key.
Mouse : Move the mouse pointer to the Record (r) or Pause (w) button
and left click while the Record or Pause button is selected.
Select Stop (q) from the REC CONTROL panel and press the Enter key.
The action of the DVD recorder following the end of recording depends on
the setting of EDIT MENU from the SYSTEM MENU screen.
DISABLE : Recording is ended and the chapter menu is created using
standard settings (i.e., the title is closed).
ENABLE : The THUMBNAIL EDIT screen will appear. This screen can
be used to modify the chapter menu's display style, to change
the thumbnails used, to input chapter names, and to perform
other similar functions. For more details, refer to page 47.
In such a case, each subsequent recording will be stored as a new title.
Depending on how the disc will be used, one of two different procedures
is implemented at this time.
If more content will be recorded to the disc using this DVD recorder:
Simply press the DVD recorder's OPEN/CLOSE button and remove the
disc. (Do not finalize the disc before it is removed.)
If the disc is to be played on this DVD recorder or on a different DVD
player:
Use FINALIZE from the REC CONTROL panel to finalize the disc before it
is ejected.
For more details regarding finalizing, refer to page 42.
41