JVC DR-MH200SE Instructions Manual

JVC DR-MH200SE Instructions Manual

Dvd & hdd video recorder
Hide thumbs Also See for DR-MH200SE:

Advertisement

DVD & HDD VIDEO RECORDER
DR-MH200SE
CABLE/SAT
TV
DVD
STANDBY ON
OPEN/
CLOSE
TV AV
TV/CBL/SAT
DVD
VIDEO
HDD
DVD
TV
PR
CANCEL
AUX
MEMO/MARK
LIVE
DUBBING
EDIT
PROGRAMME
TV
TOP MENU
NAVIGATION
ENTER
MENU
RETURN
PREVIOUS
NEXT
SLOW
PLAY/SELECT
SLOW
REC
STOP/
CLEAR
PAUSE
JUMP
REC MODE
DISPLAY
ON SCREEN
HELP
SAT
VPS/PDC
SET UP
1 STANDBY/ON
PROGRESSIVE
AUDIO
SUBTITLE
ANGLE
SCAN
LIVE CHECK
17
F1
INSTRUCTIONS
HDD
DVD
VIDEO
PULL - OPEN
DV
DV IN
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
EN
LPT1064-001A

Advertisement

Table of Contents
loading

Summary of Contents for JVC DR-MH200SE

  • Page 1 DVD & HDD VIDEO RECORDER DR-MH200SE CABLE/SAT STANDBY ON OPEN/ CLOSE TV AV TV/CBL/SAT VIDEO CANCEL MEMO/MARK LIVE DUBBING EDIT PROGRAMME TOP MENU NAVIGATION ENTER MENU RETURN PREVIOUS NEXT SLOW PLAY/SELECT SLOW STOP/ CLEAR PAUSE JUMP REC MODE DISPLAY ON SCREEN...
  • Page 2: Safety First

    SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
  • Page 3 This symbol is only valid (Business users) in the European Union. If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
  • Page 4: Table Of Contents

    CONTENTS SAFETY FIRST Safety Precautions ...2 DISC INFORMATION About Discs ...5 INDEX INSTALLING YOUR NEW UNIT Basic Connections ...16 INITIAL SETTINGS Auto Set Up...17 Preset Download...18 Language ...20 Monitor Set...21 SAT CONTROL SET Satellite Receiver Control Setting ...22 BASIC OPERATIONS ON DVD DECK Basic Playback...24 Playback Features ...25 Using The On-screen Bar ...29...
  • Page 5: Disc Information

    ● Recording and playback may not be performed depending on the characteristics and condition of the disc used, leading to unsatisfactory results. Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit.
  • Page 6 DISC INFORMATION Discs For Playback Only You can use discs with the following logos for playback only. DVD VIDEO Video CD/Super Video CD (example of region code indications) Audio CD CD-DA files CD-RW CD-DA/JPEG/ MP3 files ● Playback may not be performed depending on the characteristics and condition of the disc used.
  • Page 7 Recording Medium And Format DVD-RAM ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts. ● While recording, it is possible not only to start playback of a programme currently being recorded, but also to watch another programme previously recorded.
  • Page 8 DISC INFORMATION DVD VIDEO Marks Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports.
  • Page 9 Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction.
  • Page 10: Index

    INDEX Front View 1 STANDBY/ON A Infrared Beam Receiving Window B Front Display Panel A pg. 12 C Disc Tray D Open/Close Button (M) A pg. 8 E Stop Button (o) A pg. 24, 40 F Play Button (I) A pg. 24, 40 G Pause Button (W) A pg.
  • Page 11 Rear View A Antenna Input Connector [ANTENNA IN] A pg. 16 B Component Video Output Connectors [COMPONENT )] A pg. 16 VIDEO OUT (Y/P C S-video Output Connector [S-VIDEO] A pg. 16 D Audio Output Connectors [AUDIO OUT (RIGHT/LEFT)] A pg. 61, 69 E AV COMPU LINK Connector* * Not function with this unit.
  • Page 12 INDEX Front Display Panel A VPS/PDC Indicator A pg. 46 Appears when checking if the station being received transmits a VPS/PDC signal. Disc Type Indicator When a disc is loaded, the type of the disc is indicated. Disc Status Indicator When a disc is running, the disc marks rotate.
  • Page 13 Remote Control OPEN/ TV AV TV/CBL/SAT CLOSE VIDEO CANCEL MEMO/MARK LIVE DUBBING EDIT TOP MENU ENTER MENU PREVIOUS SLOW PLAY/SELECT STOP/ CLEAR JUMP REC MODE DISPLAY ON SCREEN VPS/PDC AUDIO SUBTITLE ANGLE LIVE CHECK A Open/Close Button (M) A pg. 8 B TV AV/VIDEO Button A pg.
  • Page 14 INDEX On-Screen Display When ASUPERIMPOSEB is set to AAUTOB and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. When playing back a recorded title 0:00 1:00 2:00...
  • Page 15 On-Screen Display (DV Dubbing) When capturing images from the external DV equipment 0:00 1:00 00:00:00. 00 FR360 12bit GR-DV3500 A Recording speed B HDD capacity graph C HDD time counter D Recording time scale E HDD mode F Remote control mode G Connected DV equipment mode H Connected DV equipment model information I Input channel...
  • Page 16: Installing Your New Unit

    INSTALLING YOUR NEW UNIT Basic Connections TV aerial cable To [ANTENNA IN] To [L-1 IN/OUT] To [COMPONENT [ANTENNA VIDEO OUT (Y/P OUT] (not supplied) 21-pin SCART RF cable cable (supplied) (supplied) Component video cable (not supplied) To 75 ohm terminal It’s essential that your unit be properly connected.
  • Page 17: Initial Settings

    Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set After the A button on the unit (or DVD A on the remote control) is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Programme numbers automatically.
  • Page 18: Preset Download

    INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Programme Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable.
  • Page 19 Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/–...
  • Page 20: Language

    INITIAL SETTINGS Language ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER On-screen Language Set This unit offers you the choice to view on-screen messages in 10 different languages.
  • Page 21: Monitor Set

    Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
  • Page 22: Sat Control Set

    SAT CONTROL SET Satellite Receiver Control Setting Satellite receiver Satellite Controller Your unit (supplied) (suggested location) Transmitter Satellite receiver 21-pin SCART cable (supplied) To [L-2 IN/ DECODER] Back of unit ENTER The following procedure is required if you receive satellite channels through a satellite receiver.
  • Page 23 Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 9 Press selection keys to select AYESB, then press ENTER to finish the Sat Control Set mode. If the satellite receiver’s channel number has not been changed correctly Press selection keys to select ANOB, then press ENTER.
  • Page 24: Basic Operations On Dvd Deck

    BASIC OPERATIONS ON DVD DECK Basic Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER ATTENTION: ● It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi-disc compatible (DVD-RAM, DVD-RW, DVD-R).
  • Page 25: Playback Features

    Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press DVD so that the DVD lamp lights up on the unit. TOP MENU ENTER MENU 3/SLOW - JUMP -...
  • Page 26 BASIC OPERATIONS ON DVD DECK Slow Motion Press W to pause during playback. Press SLOW – (O) or SLOW + (N) for 2 or more seconds. ● Each press of SLOW – (O) or SLOW + (N) increases the slow motion speed for each direction. ●...
  • Page 27 ENTER MENU S/PREVIOUS REC MODE DISPLAY AUDIO SUBTITLE Marking Positions To Play Back Again Later It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position.
  • Page 28 BASIC OPERATIONS ON DVD DECK Subtitle Selection Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. AhB appears on the TV screen at the beginning of the part where more than one subtitle language are recorded.
  • Page 29: Using The On-Screen Bar

    Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. ATTENTION: The on-screen bar can also be used for the HDD deck. Be sure to clear Library Database Navigation screen by pressing NAVIGATION.
  • Page 30 BASIC OPERATIONS ON DVD DECK Repeat Playback You can repeat playback as you like according to the type of disc. Press ON SCREEN twice to access the on-screen bar. Press selection keys to select AxB, then press ENTER. The pop-up window appears under the selected item. TITLE 99 CHAPTER 99 EACH 0:00...
  • Page 31 Locating The Beginning Of A Desired Selection You can locate the beginning of a title, chapter, group or track. During playback or while stopped Press ON SCREEN twice to access the on-screen bar. Press selection keys to select A9B, then press ENTER. Press selection keys to select the desired item, then press ENTER.
  • Page 32 BASIC OPERATIONS ON DVD DECK Simulated Surround Effect It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2 channel stereo system. Press ON SCREEN twice to access the on-screen bar. Press selection keys to select A ●...
  • Page 33 Programme Playback You can programme up to 30 tracks (Video CD/SVCD or Audio CD) to play back in the desired order. While stopped Press ON SCREEN twice to access the on-screen bar. Press selection keys to select APRGMB, then press ENTER. The programme table appears under on-screen bar.
  • Page 34: Parental Lock

    BASIC OPERATIONS ON DVD DECK Parental Lock This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced by other scenes.
  • Page 35: Basic Recording

    Basic Recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised. ENTER REC MODE Load a recordable disc.
  • Page 36: Recording Features

    BASIC OPERATIONS ON DVD DECK Recording Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press DVD so that the DVD lamp lights up on the unit. TV AV/ VIDEO DISPLAY Instant Timer Recording (ITR)
  • Page 37 Free Rate Function To record the entire programme, the unit automatically sets the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
  • Page 38: Basic Operations On Hdd Deck

    BASIC OPERATIONS ON HDD DECK Basic Recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on, during which no operation can be made.
  • Page 39: Recording Features

    Recording Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD on the remote so that the HDD lamp lights up on the unit. TV AV/ VIDEO DISPLAY Instant Timer Recording (ITR)
  • Page 40: Basic Playback

    BASIC OPERATIONS ON HDD DECK Basic Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER ATTENTION: ● It may take a few seconds to start playback. This is not a malfunction.
  • Page 41 One Touch Replay You can move back the playback position slightly. Press w. ● Each press skips back for approximately 7 seconds and resumes playback. ● Pressing while paused skips back for approximately 7 seconds and resumes pause. 1.5x Speed Playback You can play back a title quickly.
  • Page 42: Live Memory Playback

    LIVE MEMORY PLAYBACK Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to select the HDD or DVD deck. This unit records pictures onto the hard disc and DVD-RAM disc, instead of video tapes, then plays back the pictures recorded on the disc.
  • Page 43 Buttons To Be Used During Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to select the desired deck for Live Memory Playback.
  • Page 44 LIVE MEMORY PLAYBACK Temporary recording for Live Memory (HDD deck only) This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours. (A pg.
  • Page 45: Timer Recording

    Timer Programming You can programme this unit to timer record as many as 16 programmes. With the S system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the S ●...
  • Page 46 TIMER RECORDING Weekly/Daily Recording You can record programmes with one of the following weekly/daily timer settings. For the HDD deck When you select a mode other than ONCE, the space on the hard disk drive is saved for new recordings by overwriting previous recordings.
  • Page 47: Manual Timer Programming

    Manual Timer Programming You can programme this unit to timer record as many as 16 programmes. If you do not know the S number for the programme you wish to record, use the following procedure to set your unit to timer record the programme.
  • Page 48 TIMER RECORDING ENTER Check Programmes CABLE/SAT To check the whole list of programmes Press PROGRAMME to access the programme top screen. Press selection keys to select APROGRAMME LISTB, PROGRAMME then press ENTER. ● The details of a selected programme Selection Keys appear on the top of FGDE the screen.
  • Page 49: Automatic Satellite Programme Recording (Hdd Deck Only)

    Automatic Satellite Programme Recording (HDD Deck Only) This function allows you to automatically record a satellite programme which is timer programmed on your external satellite receiver. Connect a satellite receiver to the unit’s [L-2 IN/ DECODER] connector and programme the timer on the satellite receiver.
  • Page 50: Navigation

    NAVIGATION Library Database Navigation The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily. You can record up to 99 titles on a disc. Each time a title is recorded, the information of the title is registered for the Library Database Navigation automatically.
  • Page 51: Edit Original Information

    Scan For Beginning Of Title ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck. ● Load a DVD disc to scan. ENTER You can scan the beginning of the title easily with the Library Database Navigation.
  • Page 52: Modify Category

    NAVIGATION Modify Title Name Perform steps 1 – 4 of AModify IndexB (A pg. 51) before continuing. Press selection keys to select ANAMEB, then press ENTER. Press selection keys to select AALPHABETB, ASYMBOL1B or ASYMBOL2B. Press selection keys to select the desired letter or symbol, then press ENTER.
  • Page 53 Delete Unwanted Part Of The Title (DVD-RAM & DVD-RW (VR mode) only) You can delete unwanted part of the title. Perform steps 1 – 2 of AModify IndexB (A pg. 51) before continuing. Press selection keys to select ADEL SCENB, then press ENTER.
  • Page 54: Edit Play List Information

    NAVIGATION Edit Play List Information ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● Press HDD or DVD to choose the corresponding deck. ● Load a DVD disc to modify. ATTENTION: ●...
  • Page 55 Add scenes Perform steps 1 – 5 of AEdit ScenesB (A pg. 54) before continuing. Press selection keys to select ASEL. TITLEB, then press ENTER. Perform steps 4 – 11 in ACreate Play ListB (A pg. 54). Move Scenes Perform steps 1 – 5 of AEdit ScenesB (A pg. 54) before continuing.
  • Page 56: Edit Library Information

    Press NAVIGATION to return to the normal screen. NOTES: ● It is not possible to register discs formatted on devices other than JVC’s DVD recorders. ● It is not possible to register discs recorded on devices other than JVC’s DVD recorders.
  • Page 57: Playback With Mp3/Wma/Jpeg Navigation

    Playback With MP3/WMA/JPEG Navigation This unit can play back discs that MP3/WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/WMA/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily.
  • Page 58: Editing

    EDITING Dubbing ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. DUBBING ENTER NOTES: ● It is not possible to dub copy-protected contents. An error message will appear on the TV screen. ●...
  • Page 59 Manual Dubbing (From HDD To DVD) It is possible to perform dubbing in the desired transfer rate. Load a recordable disc. Press DUBBING to access the Dubbing Menu screen. Press selection keys to select AHDDNDVDB, then press ENTER. Press selection keys to select AMANUALB, then press ENTER. Perform step 5 of AHigh Speed Dubbing (From HDD To DVD)B (A pg.
  • Page 60: Dv Dubbing

    EDITING DV Dubbing You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing. NOTES: ●...
  • Page 61: Digital Audio Dubbing

    Press selection keys to select ENTER. The dubbing starts. ● Playback on the external DV equipment and recording on the unit should start simultaneously. ● To pause dubbing, press selection keys to select then press ENTER. Both the unit and the external DV equipment pause dubbing.
  • Page 62: Edit From A Camcorder

    EDITING Edit From A Camcorder You can use a camcorder as the source player and your unit as the recording deck. A If the camcorder has no S-VIDEO output connector: Recorder To [VIDEO/AUDIO ((MONO) L/R)] input Audio/video cable Player AUDIO/VIDEO OUT B If the camcorder has an S-VIDEO output connector: Recorder To [S-VIDEO] input...
  • Page 63: Edit To Or From Another Recorder

    Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTES: ● When using another recorder as the recording deck, refer to its instruction manual. ● It is not possible to dub copy-protected contents. An error message will appear on the TV screen.
  • Page 64: Output/Input Set

    EDITING Output/Input Set ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER L-1 Output And L-1 Input Setting The [L-1 IN/OUT] connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated).
  • Page 65 L-2 Select Setting Set AL-2 SELECTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN/DECODER] connector. Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB (A pg. 64). Press selection keys to select AL-2 SELECTB, then press ENTER. Press selection keys DVD VIDEO SET UP to select the...
  • Page 66: Remote Control

    Remote Control Functions Remote Control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of the four codes (1, 2, 3 or 4). The remote control is preset to send code 3 signals because your unit is initially set to respond to code 3 signals.
  • Page 67 08, 14 Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. ● Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.
  • Page 68: System Connections

    SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector. Connect the satellite receiver to the [L-2 IN/DECODER] connector, then connect the [L-1 IN/OUT] connector to the TV’s connector. NOTES: ●...
  • Page 69: Connecting To A Dolby Digital Decoder Or An Amplifier With Built-In Dts

    Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS. Dolby Digital Decoder or amplifier with built-in DTS Optical cable (not supplied) To [DIGITAL AUDIO OUT (OPTICAL)]...
  • Page 70: Subsidiary Settings

    SUBSIDIARY SETTINGS Mode Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER AUDIO Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 70 through 72), then follow the procedure below.
  • Page 71 DISC PLAY SET UP RESUME OFF / / DISC RESUME When this function is set to AONB or ADISC RESUMEB, you can use the resume function. (A pg. 26) You cannot use the resume function. You can start playback from the resume point of the placed disc.
  • Page 72: Scan Mode Set

    SUBSIDIARY SETTINGS DISPLAY SET SUPERIMPOSE OFF / AUTO When this function is set to AAUTOB, various operational indicators appear on the TV screen. Messages appear in the selected language. (A pg. 20) OFF: To turn off superimposed indications. AUTO To superimpose operational indications for approximately five seconds just after the corresponding operation.
  • Page 73: Show View System Setup

    System Setup IMPORTANT: Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18) or Auto Channel Set (A pg. 74) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases. ●...
  • Page 74: Tuner Set

    SUBSIDIARY SETTINGS Tuner Set Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR +/– buttons without going through any vacant channels.
  • Page 75 Manual Channel Set Store channels that were not stored during Auto Set Up (A pg. 17), Preset Download (A pg. 18) or Auto Channel Set (A pg. 74). Press SET UP to access the Main Menu screen. Press selection keys to select AINITIAL SET UPB, then press Press selection keys to select ATUNER SETB, then press G.
  • Page 76 SUBSIDIARY SETTINGS When Receiving A Scrambled Broadcast Set AL-2 SELECTB to ADECODERB. (A pg. 65) Perform steps 1 – 5 of AManual Channel SetB (A pg. 75). Press selection keys to select the channel position broadcasting scrambled programmes, then press ENTER. The Confirmation screen appears.
  • Page 77: Clock Set

    Clock Set IMPORTANT: If you performed Auto Set Up (A pg. 17) or Preset Download (A pg. 18), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if ^ ^ Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download.
  • Page 78: Format A Disc (Dvd Deck Only)

    SUBSIDIARY SETTINGS Format A Disc (DVD Deck Only) Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them.
  • Page 79: Finalise A Disc (Dvd Deck Only)

    ● Although DVD-R/RW discs finalised on this unit become playable on DVD players compatible with DVD-R/RW discs, some discs still may not play, for which JVC cannot take responsibility. ● Marked points marked before finalising will be deleted, and titles will be divided automatically into AchaptersB approximately every 5 minutes.
  • Page 80: Help Function

    SUBSIDIARY SETTINGS Help Function Use this function if you encounter problems while operating this unit. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ENTER Press ? to access the help screen. ●...
  • Page 81: Troubleshooting

    The remote control of a JVC TV will not operate the unit. ● The setting of the remote control code is inappropriate. N To operate the unit using a JVC TV remote control, set the remote control code of the unit to A1B (Default: A3B). (A pg. 66) Playback (DVD Deck) The DVD deck cannot be operated.
  • Page 82 TROUBLESHOOTING Recording (HDD Deck) TV broadcasts cannot be recorded. ● AL-1B, AL-2B or AF-1B has been selected as the input mode. N Set to the desired channel. Camcorder recording is not possible. ● The camcorder has not been properly connected. N Confirm that the camcorder is properly connected.
  • Page 83 On-screen Message DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC? ● A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 56) INSERT DISC XXXX ● Appears when a title that has been selected in the library is not contained in the loaded disc.
  • Page 84: Specifications

    SPECIFICATIONS GENERAL Power requirement AC 220 V - 240 VH, 50 Hz/60 Hz Power consumption Power on: 37 W Power off: 19.3 W Temperature Operating: 5°C to 35°C Storage: –20°C to 60°C Operating position Horizontal only Dimensions (WxHxD) 435 mm x 70 mm x 345.5 mm Weight 6.1 kg Input/Output...
  • Page 85: Appendix

    Language Code List Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian...
  • Page 86 APPENDIX Country/Area Code List for Parental Lock Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam...
  • Page 87 Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Jamahiriya Morocco Monaco Moldova, Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Namibia New Caledonia Niger Norfolk Island Nigeria...
  • Page 88 APPENDIX TV Station And ID List The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station. STATION NAME 1000 TV1000...
  • Page 89: List Of Terms

    ... 30 A-B Repeat Playback ... 32 Adjusting The Picture Quality ... 27 Angle Selection ... 28 Audio Channel Selection Audio Language/Sound Selection ... 74 Auto Channel Set ... 24 Basic Playback ... 38 Basic Recording Cancel And Change Programmes ...
  • Page 90 MEMO...
  • Page 91 MEMO...
  • Page 92 Printed in Germany © 2005 Victor Company of Japan, Limited 0505MNH-SW-VE...

This manual is also suitable for:

Dr-mh200sefDr-mh200sek

Table of Contents