Removing Rear Wheel - BMW R 1200 R Rider's Manual

Brake caliper to slider
tube
30 Nm
with BMW Motorrad Integral
OE
ABS
Clip on two clips 1 holding the
sensor cable to the brake line.
Make sure that the sensor
cable is seated in holders 3
and 4.
Remove the adhesive tape
from the wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
the brake lever is pulled or the
brake pedal depressed.
Operate the brake several
times until the brake pads are
bedded.

Removing rear wheel

Place the motorcycle on an
auxiliary stand; BMW Motorrad
recommends the BMW Motor-
rad rear-wheel stand.
Install the rear-wheel stand
( 110).
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
8
105
z