On-Board Computer - BMW R 1200 R Rider's Manual

Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 2.
The tripmeter is reset to zero.
Residual range
without on-board computer
The residual-range readout 1 in-
dicates how far you can ride with
the fuel remaining in the tank.
This reading is not displayed until
fuel level has dropped to reserve.
This distance is calculated on the
basis of fuel level and average
consumption.
When refuelling after running on
OE
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. If the sensor can-
not register the new level the
residual-range readout cannot be
updated.
The calculated range is an
approximate value. Con-
sequently, BMW Motorrad re-
commends that you should not
try to use the full residual range
before refuelling.

On-board computer

with on-board computer
Select the readings
Switch on the ignition.
Repeatedly press button 1 until
the reading shows the value
you want.
4
45
OE
z