Table of Contents
Advertisement
TABLE 3
Command
mode
Feature
configuration
Console and
VTY (line)
configuration
NOTE
Pressing Ctrl+Z or entering the end command in any mode returns you to Privileged EXEC mode.
Entering exit in any mode returns you to the previous mode.
CEE CLI keyboard shortcuts
Table 4
TABLE 4
Keystroke
Ctrl+B or the left arrow key.
Ctrl+F or the right arrow key.
Ctrl+A
Ctrl+E
Esc B
Esc F
Ctrl+Z
Ctrl+P or the up arrow key.
Ctrl+N or the down arrow key.
NOTE
In EXEC and Privileged EXEC modes, use the show history command to list the commands most
recently entered. The switch retains the history of the last 1000 commands entered from all
terminals.
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01
CEE CLI command modes
Prompt
CEE map:
switch(config-ceemap)#
Standard ACL:
switch(conf-macl-std)#
Extended ACL:
switch(conf-macl-ext)#
switch(config-line)#
lists CEE CLI keyboard shortcuts.
CEE CLI keyboard shortcuts
CEE Command Line Interface
How to access the command mode
From the global configuration mode,
specify a CEE feature by entering
one of the following feature names:
•
cee-map
•
mac access-list
From the global configuration mode,
configure a terminal connected
through the console port by entering
the line console command.
Configure a terminal connected
through a Telnet session by entering
the line vty command.
Description
Moves the cursor back one character.
Moves the cursor forward one character.
Moves the cursor to the beginning of the command line.
Moves the cursor to the end of the command line.
Moves the cursor back one word.
Moves the cursor forward one word.
Returns to Privileged EXEC mode.
Displays commands in the history buffer with the most recent command
displayed first.
Displays commands in the history buffer with the most recent command
displayed last.
2
Description
Access and configure
CEE features.
Configure a terminal
connected through the
console port or a
terminal connected
through a Telnet
session.
17
Advertisement
Table of Contents
