Disabling 802.1X On Specific Interface Ports - Dell 53-1002116-01 Administrator's Manual

11
Interface-specific administrative tasks for 802.1x

Disabling 802.1x on specific interface ports

To disable 802.1x authentication on a specific interface port, perform the following steps from
Privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
2. Use the interface command to select the interface port to modify.
3. Use the no dot1x port-control command to disable 802.1x Authentication.
4. Enter the copy command to save the running-config file to the startup-config file.
114
switch(conf-if-te-0/16)#dot1x timeout re-authperiod 4000
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#no dot1x authentication
switch(conf-if-te-0/16)#exit
switch(config)#end
switch#copy running-config startup-config
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01