Table of Contents
Advertisement
16
Creating and managing the FCoE login group configuration
To create an FCoE login group, perform the following task.
Task
Syntax is as follows:
•
•
•
•
•
•
Modifying the FCoE login group device list
To add or remove VN_port devices from the FCoE login group, perform the following tasks.
Task
Add VN_port devices to the FCoE login group.
Syntax is as follows:
•
•
Remove VN_port devices from the FCoE login
group. Syntax is as follows:
•
•
Deleting an FCoE login group
To delete an FCoE login group, perform the following task.
Task
Delete an FCoE login group. Syntax is as follows:
•
136
--create—Create a login group.
lgname—Specify the name of the login group
for this switch. The maximum length is a
64-byte string.
-switch swwn—Specify the WWN of the
switch for which the login group is being
created.
-self—Specify the WWN of the current switch.
-allowall—Allow all VN_port devices to log in
to the switch.
member—Identify the WWN of the VN_port.
The WWN must be specified in hex as
xx.xx.xx.xx.xx.xx.xx.xx. Only specified
members are allowed to log into the switch.
lgname—Specify the name of the login group
to which VN_port devices are to be added.
member—Identify the WWN of the VN_port.
The WWN must be specified in hex as
xx.xx.xx.xx.xx.xx.xx.xx. Only specified
members are allowed to log into the switch.
lgname—Specify the name of the login group
from which VN_port devices are to be
removed.
member—Identify the WWN of the VN_port.
The WWN must be specified in hex as
xx.xx.xx.xx.xx.xx.xx.x. Only specified members
are allowed to log into the switch.
lgname—Specify the name of the login
group.
Command
switch:admin> fcoelogingroup --create lgname -switch
swwn | -self [-allowall | "member; member;..."]
Command
switch:admin> fcoelogingroup --add lgname member;
member;...
switch:admin> fcoelogingroup --remove lgname
member; member;...
Command
switch:admin> fcoelogingroup --delete lgname
Dell Converged Enhanced Ethernet Administrator's Guide
53-1002116-01
Advertisement
Table of Contents
