Checking The Cache Jumper; Processor Upgrade Jumpers - NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual

7. Reinstall any removed expansion boards.
Reinstall the system cover.
8.
Reconnect any disconnected peripherals and turn on the system.
9.

CHECKING THE CACHE JUMPER

A synchronous pipeline burst cache is installed in your system. Use this procedure to verify
the jumper setting.
Processor/Bus Speed
75-MHz Processor/
50-MHz Bus Speed
90-MHz Processor/
50-MHz Bus Speed
100-MHz Processor/
66-MHz Bus Speed
120-MHz Processor/
60-MHz Bus Speed
133-MHz Processor/
66-MHz Bus Speed
150-MHz Processor/
60-MHz Bus Speed
166-MHz Processor/
66-MHz Bus Speed
1-2 VRE
2-3 VR
Figure B-2 Processor Upgrade Jumpers
: Only change (or check) the cache
CAUTION
jumper setting if you are installing cache.
Otherwise, keep the jumper at its factory setting.
System Board Jumpers
1
1
B-3