Ip Igmp Profile; Permit, Deny - SMC Networks 8126PL2-F - annexe 1 Management Manual

4
Command Line Interface
• The IGMP filtering feature operates in the same manner when MVR is used
to forward multicast traffic.
Example
Console(config)#ip igmp filter
Console(config)#

ip igmp profile

This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number. (Range:1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied
to join. The same profile can be applied to many interfaces, but only one
profile can be assigned to one interface. Each profile has only one access
mode; either permit or deny.
Example
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#

permit, deny

This command sets the access mode for an IGMP filter profile. Use the no
form to delete a profile number.
Syntax
{permit | deny}
Default Setting
Deny
Command Mode
IGMP Profile Configuration
Command Usage
• Each profile has only one access mode; either permit or deny.
4-278