Cluster Member Configuration; Figure 3-140 Cluster Member Configuration - SMC Networks 8126PL2-F - annexe 1 Management Manual

3
Configuring the Switch

Cluster Member Configuration

Adds Candidate switches to the cluster as Members.
Command Attributes
• Member ID – Specify a Member ID number for the selected Candidate switch.
(Range: 1-16)
• MAC Address – Select a discovered switch MAC address from the Candidate
Table, or enter a specific MAC address of a known switch.
Web – Click Cluster, Member Configuration.
CLI – This example creates a new cluster Member by specifying the Candidate
switch MAC address and setting a Member ID.
Console(config)#cluster member mac-address 00-30-FC-12-34-56 id 1
Console(config)#exit
Console#show cluster candidates
Cluster Candidates:
Role
--------------- ----------------- --------------------------------------
ACTIVE MEMBER
Console#
3-238

Figure 3-140 Cluster Member Configuration

Mac
00-30-fc-12-34-56 SMC Networks SMC6128PL2-F
Description
4-58
4-60