Ip Igmp Profile; Permit, Deny - SMC Networks TigerAccess SMC7816M Management Manual

M F
ULTICAST ILTERING

ip igmp profile

This command creates an IGMP filter profile number and enters IGMP
profile configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or
denied to join. The same profile can be applied to many interfaces, but
only one profile can be assigned to one interface. Each profile has only
one access mode; either permit or deny.
Example
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#

permit, deny

This command sets the access mode for an IGMP filter profile. Use the no
form to delete a profile number.
Syntax
{permit | deny}
Default Setting
Deny
Command Mode
IGMP Profile Configuration
35-16
C
OMMANDS