Table of Contents
Advertisement
4
Command Line Interface
• The Boot ROM and Loader cannot be uploaded or downloaded from the TFTP
server. You must follow the instructions in the release notes for new firmware,
or contact your distributor for help.
• For information on specifying an https-certificate, see "Replacing the Default
Secure-site Certificate" on page 3-74. For information on configuring the
switch to use HTTPS for a secure connection, see "ip http secure-server" on
page 4-100.
Example
The following example shows how to download new firmware from a TFTP server:
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config:
2. opcode: <1-2>: 2
Source file name: ES4526RO-PoE-FLF-17V01.BIX
Destination file name: V1002
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#
The following example shows how to upload the configuration settings to a file on
the TFTP server:
Console#copy file tftp
Choose file type:
1. config:
2. opcode: <1-2>: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#
The following example shows how to copy the running configuration to a startup file.
Console#copy running-config file
destination file name: startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
4-26
Advertisement
Table of Contents
