Aaa Accounting Dot1X - SMC Networks 8126PL2-F - annexe 1 Management Manual

4
Command Line Interface

aaa accounting dot1x

This command enables the accounting of requested 802.1X services for network
access. Use the no form to disable the accounting service.
Syntax
aaa accounting dot1x {default | method-name} start-stop group {radius |
tacacs+ |server-group}
no aaa accounting dot1x {default | method-name}
• default - Specifies the default accounting method for service requests.
• method-name - Specifies an accounting method for service requests.
(Range: 1-255 characters)
• start-stop - Records accounting from starting point and stopping point.
• group - Specifies the server group to use.
- radius - Specifies all RADIUS hosts configure with the radius-server
host command described on page 4-83.
- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-87.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-90.
(Range: 1-255 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified RADIUS or TACACS+
servers, and do not actually send any information to the servers about the
methods to use.
Example
Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#
4-92