Table of Contents
Advertisement
C
L
OMMAND
INE
speed
Use this command to set the terminal line's baud rate. This command sets
both the transmit (to terminal) and receive (from terminal) speeds. Use the
no form to restore the default setting.
Syntax
speed bps
no speed
bps - Baud rate in bits per second.
(Options: auto, 9600, 19200, 57600, 38400, 115200 bps)
Default Setting
9600 bps
Command Mode
Line Configuration
Command Usage
Set the speed to match the baud rate of the device connected to the serial
port or specify "auto." Some baud rates available on devices connected to
the port might not be supported. The system indicates if the speed you
selected is not supported.
Example
To specify 57600 bps, enter this command:
Console(config-line)#speed 57600
Console(config-line)#
4-24
I
NTERFACE
Advertisement
Table of Contents
