Table of Contents
Advertisement
•
The switch does not support the explicit "deny any any" rule for the
egress IP ACL or the egress MAC ACLs. If these rules are included in
the ACL, and you attempt to bind the ACL to an interface for egress
checking, the bind operation will fail.
Command Attributes
•
Port – Fixed port or SFP module. (Range: 1-24)
•
IP – Specifies the IP ACL to bind to a port.
•
MAC – Specifies the MAC ACL to bind to a port.
•
IN – ACL for ingress packets.
•
OUT – ACL for egress packets.
•
ACL Name – Name of the ACL.
Web – Click ACL, ACL Port Binding. Mark the Enable field for the port
you want to bind to an ACL for ingress or egress traffic, select the required
ACL from the drop-down list, then click Apply.
Figure 3-46 ACL Port Binding
A
C
CCESS
ONTROL
L
ISTS
3-103
Advertisement
Table of Contents
