Table of Contents
Advertisement
I
NTRODUCTION
Members of VLAN groups can be manually assigned to a specific set of
VLANs. This allows the switch to restrict traffic to the VLAN groups to
which a user has been assigned. By segmenting your network into VLANs,
you can:
•
Eliminate broadcast storms which severely degrade performance in a
flat network.
•
Simplify network management for node changes/moves by remotely
configuring VLAN membership for any port, rather than having to
manually change the network connection.
•
Provide data security by restricting all traffic to the originating VLAN.
Traffic Prioritization – This switch prioritizes each packet based on the
required level of service, using four priority queues with strict or Weighted
Round Robin Queuing. It uses IEEE 802.1p and 802.1Q tags to prioritize
incoming traffic based on input from the end-station application. These
functions can be used to provide independent priorities for delay-sensitive
data and best-effort data.
This switch also supports several common methods of prioritizing layer 3/
4 traffic to meet application requirements. Traffic can be prioritized based
on the priority bits in the IP frame's Type of Service (ToS) octet. When
these services are enabled, the priorities are mapped to a Class of Service
value by the switch, and the traffic then sent to the corresponding output
queue.
Multicast Filtering – Specific multicast traffic can be assigned to its own
VLAN to ensure that it does not interfere with normal network traffic and
to guarantee real-time delivery by setting the required priority level for the
designated VLAN. The switch uses IGMP Snooping and Query to manage
multicast group registration.
1-6
Advertisement
Table of Contents
