Table of Contents
Advertisement
C
ONFIGURING THE
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Command Attributes
Main Board
•
Serial Number – The serial number of the switch.
•
Number of Ports – Number of built-in RJ-45 ports and expansion
ports.
•
Hardware Version – Hardware version of the main board.
•
Internal Power Status – Displays the status of the internal power
supply.
•
Redundant Power Status* – Displays the status of the redundant
power supply (this will always display as "not present" since this switch
has no redundant power supply).
Management Software
•
Unit ID* – The ID number of the switch in the stack.
•
Loader Version – Version number of loader code.
•
Boot-ROM Version – Version of Power-On Self-Test (POST) and
boot code.
•
Operation Code Version – Version number of runtime code.
•
Role – Shows whether this switch is operating as Master or Slave.
* CLI only.
Expansion Slot
•
Expansion Slot 1/2 – Slots for extender transceivers.
3-14
S
WITCH
Advertisement
Table of Contents
