Route Selection - VDO MS 3200 Owner's Manual

GUIDANCE

Route selection

During guidance, you may also modify the route criterion and activate or deactivate
dynamic route planning. The system will then plan a new route taking into account
the new setting of the current position of your car.
In the guidance screen, select the symbol for route selection (on the basis of the
setting in the destination input U, V, W or X).
The following options are available:
–
Dynamic route*: Use this option to specify
whether or not TMC traffic information should be
taken into account in route planning.
–
Fast: If you prefer a fast route
–
Short: If you prefer a short route
–
Main roads: If you prefer expressways
–
No main roads: Avoids expressways
In addition, you can bypass toll roads when planning your route.
Activate the "
possible.
If no toll-free roads are available, toll roads will be included for planning the route.
Note: If this option is activated, route planning may take longer than the time needed
with this function deactivated. Therefore this option should only be activated if needed.
* only with TMC extension connected
38
" option if you wish to avoid toll roads as much as