VDO MS 3200 Owner's Manual page 16

Installing GPS antenna, ill. 6
The GPS antenna can be mounted in the vehicle interior, for example on the
dashboard or on the hatshelf. The antenna must have clear "view" of the sky.
In vehicles with metallic window tinting, the GPS antenna should be mounted in an
area without tinting or outside on the vehicle body, for example in the plastic
bumper.
–
Mount the antenna with the supplied double-sided adhesive tape.
Notes: To ensure perfect function please keep a distance of at least 10 cm to metall
parts like window frame.
The mounting temperature should be at least 15 degrees centigrade to ensure the full
adhesive effect of the tape.
Mounting monitor, ill. 7 - 8
A
Never install the monitor in an area where the head could impact in case of an
accident!
The monitor can be fastened with the supplied support either in normal or in
suspended position. If it is mounted in suspended position, make sure that the display
contents is rotated 180 degrees ("
Glueing the support
1. Fix the mounting plate with two Phillips head screws to the bottom of the monitor
support.
2. Install monitor connector with the two countersunk screws to the monitor support,
see ill. 8.
3. Slide monitor on the connector until it clicks into position.
4. Determine the mounting position of the monitor.
5. Remove the monitor from the support.
CAUTION: When removing the monitor from the support, always make sure to press
the release key on the rear of the connector!
6. Clean the surface from grease and dust with methyl alcohol.
7. Remove protective paper from one side of the supplied adhesive tape and stick it to
the bottom of the mounting plate.
8. Remove protective paper from the lower side of the adhesive tape and place the
monitor support onto mounting surface and press firmly.
Note: Mounting temperature should be at least 15 degrees centigrade to ensure the
full adhesive effect of the tape.
Screwing the monitor support
Screw monitor support without mounting plate directly in place with two appropriate
screws.
Alternative mounting
To extend the mounting possibilities you can also mount the monitor without the
supplied support:
Directly stick the monitor on the dashboard with double-sided self-adhesive tape.
For alternative mounting different supports are available in the high street.
A
Observe safety warnings concerning driver's sight and air bag inflation area!
MOUNTING INSTRUCTIONS
" menu, option " ").
11