Viapoints; Via Point Input - VDO MS 3200 Owner's Manual

Via point input

If you wish to visit other locations en route to the
entered destination address, these can be stored as
via points. The navigation system then plans the route
to include the via points in the given sequence before
the destination address is reached.
When you reach a via point, you will hear "You have
arrived." The navigation system will immediately
begin to plan the route to the next via point or the
final destination.
In the address manager or on the "
points you have not reached yet or which you do not wish to visit any longer.
See page 40 or 46.
In the main control, select "
:
The "
The following options are available in the "
New address
Input country, city, road, number or crossroads or special facility as via point.
Load address
Loading an address stored in the address book as a via point.
Last destin.
Recall one of the 10 addresses last used for guidance to load as a via point.
Info on car pos.
Loading a special facility in the vicinity of the current position of the car.
Geo. Long-/Latit
Entering a destination by means of GPS coordinates (geographic latitude and
longitude).
Travel info
If you have enabled a C-IQ Travel Info product (e.g. Varta, Michelin, etc.) you can
search specifically for particular facilities and transfer them directly as the via point.
Detailed information about advanced search options can be found in the Travel Info
brochure supplied with the map CD.
The input of a via point is identical to the input of a destination address.
" menu appears.
" information screen you can delete via
"
" menu:

VIAPOINTS

33