Volume; Language; Measuring Units; Display - VDO MS 3100 Owner's Manual

Volume

Adjusting the volume:
Place the cursor on the volume slider.
Confirm by pressing OK.
:
The volume adjustment is activated now.
Adjust the desired volume level with the cursor keys 4 or 6.
:
The selected volume setting is announced.
Press OK again to store the setting.
Voice messages on/off:
Place the cursor on the option behind the loudspeaker icon.
Press OK.
Select Mode "On" or "Off".
Press OK again to store this selection.

Language

Select one of the two languages pre-loaded in the system,
or:
Select "Other language" to replace one of the loaded languages with a different
one from the supplied system software CD.
Select the language to be replaced.
:
You are prompted to insert the software CD.
Insert the VDO Dayton system software CD in the navigation computer.
Follow the instructions given by the system to load other languages.

Measuring units

Select between the following measuring units:
–
Metric: display in kilometres and metres;
–
Anglo: display in miles and yards;
–
American: display in miles, half and quarter miles and feet.

Display

For overhead mounting of the display it is possible to rotate the display contents 180
degrees.
Select the desired setting according to the mounting position of the display.
SYSTEM SETTINGS
41