Keyboard illumination
The keyboard of the remote control is illuminated when you press one of the keys. The
illumination is switched off automatically after a while. When inserted in the holder
the keyboard is illuminated permanently as long as the ignition is switched on.
Switching on / off
The navigation system is switched on / off together with the ignition.
Switch on the ignition.
:
As soon as the navigation system is operable, an advice on the use of the system
appears on the display.
Read and confirm this advice by pressing OK on the remote control.
:
The "Main control" menu appears.
After a few seconds the system is initialized and you can select the navigation
functions (options in highlighted letters).
Stand-by mode
If you do not wish to hear guidance advice, you can set the navigation system to its
stand-by mode.
Select "Stand-by" from the main control menu.
:
The display is switched off and audible guidance advice is muted.
Press one of the cursor keys 4, 6, 8, 2 or the OK key on the remote control to
resume normal operation.
If the navigation system was switched off in stand-by mode, it restarts in stand-by
mode when turning the ignition on again.
Volume
You can adjust the volume of the audible guidance advice as follows:
Press the + key once or more than once to increase the volume of the voice
messages.
Press the - key once or more than once to decrease the volume of the voice
messages.
:
The adjusted volume is announced.
OPERATION
15