APRILIA SCARABEO 50 - 1997 Manual page 57

Carefully read p. 54 (BULBS).
To change them, proceed as follows:
Unscrew and remove the two screws (1).

While removing the protection
screen, proceed carefully in or-
der not to break the cog.
Remove the protection screen (2).
Remove the bulb from its seat.

Insert the bulb in the socket,
making the two bulb pins coin-
cide with the relevant guides on the
socket.
Correctly install a new bulb of the same
type.

Upon reassembly, position the
protection screen correctly in its
seat.
Tighten the screws (1) moderately and
carefully, in order not to damage the
protection screen.
Carefully read p. 54 (BULBS).
To change the bulb, proceed as follows:
Unscrew and remove the screw (3).
Remove the cover (4).
Extract the rubber bulb socket (5).
Withdraw the bulb from its seat.
Correctly install a new bulb, following the
reverse order.
use and maintenance Scarabeo 50 57