APRILIA SCARABEO 50 - 1997 Manual page 45

Carefully read p. 33 (MAINTENANCE).
Position the vehicle on the centre stand.
Unscrew and remove the two screws (1).
Unscrew and remove the two screws (2).

Proceed with care, in order not
to damage the seat (3) of the
tang (4).
By means of a small-tipped screwdriv-
er, lift the tang (4) positioned inside the
front handlebar cover (5).
Repeat the operation described above
on the lower part of the handlebar cover.

Handle the plastic and painted
components with care and avoid
scraping or damaging them.
Remove the front handlebar cover (5),
taking care not to break the tangs.

Upon reassembly, make sure
that the tangs are correctly in-
serted.
Carefully read p. 33 (MAINTENANCE).

Handle the painted components
with care and avoid scraping or
damaging them.
Position the vehicle on the centre stand.
Unscrew and remove the screw (6).
Remove the inspection cover (7).
use and maintenance Scarabeo 50 45