APRILIA SCARABEO 50 - 1997 Manual page 46

Carefully read p. 33 (MAINTENANCE).
Position the vehicle on the centre stand.

Before performing the opera-
tions described below, let the
engine and the exhaust silencer
cool down until they have reached room
temperature, in order to avoid burns.
46 use and maintenance Scarabeo 50
Unscrew and remove the three screws
(1).
Remove the protection cover (2).
Unscrew and remove the two screws (3)
and (4) that fasten the exhaust silencer
to the engine.
Screw (3) and (4) driving torque:
25 Nm (2.5 kgm).

If the additional flange (7) is pro-
v i d e d , d o n o t u n s c r e w t h e
screws (8) and (9), but follow the
procedure described here below.
Unscrew and remove the screws (5) and
(6).
Screw (5) and (6) driving torque:
12 Nm (1.2 kgm).
Remove the exhaust silencer.

Upon reassembly, replace the
gasket positioned between the
exhaust manifold and the silencer with
a new one.