Table of Contents
Advertisement
The electrical parts work only when the ignition
switch is in position " ".
The lighting system works only when the motor is
running.
1) LIGHT SWITCH (
-
)
•
Before using the light switch, make sure that the
dimmer switch (
bar) is in position "
".
When the light switch is in position "
the light switch is in position "
dashboard lights and the low or high beam are on.
By means of the dimmer switch (
TROLS ON THE LEFT SIDE OF THE HANDLEBAR) it is pos-
sible to operate the low or high beam.
1a) DIMMER SWITCH (
When the dimmer switch is in position "
rear parking light and the dashboard lights are on; when the
dimmer switch in position "
ing light and the dashboard lights are on.
The lights can be switched off only by stopping
the engine.
-
) (left side of the handle-
", the lights are off; when
•
", the rear parking light, the
-
), see p. 16 (CON-
-
)
", the low beam, the
", the high beam, the rear park-
2) START PUSH BUTTON ( )
When the start push button is pressed and one of the brake
levers (front or rear) is activated at the same time, the starter
makes the engine run.
For the starting procedure, see p. 28 (STARTING).
use and maintenance Scarabeo 50
17
Hide quick links:
Advertisement
Table of Contents
