APRILIA SCARABEO 50 - 1997 Manual page 54

To rapidly check the correct direction of the
beam, place the vehicle on flat ground, 10
m away from a wall.
Turn on the low beam, sit on the vehicle
and make sure that the beam projected on
the wall is slightly under the horizontal line
of the headlight (about 9/10th of the total
height).
54 use and maintenance Scarabeo 50
To adjust the headlight beam:
Act on the suitable screw (1) by means
of a screwdriver.
By TURNING IT CLOCKWISE, you set
the beam upwards.
By TURNING IT ANTICLOCKWISE, you
set the beam downwards.
Carefully read p. 33 (MAINTENANCE).

Before changing a bulb, turn the
ignition switch to position "
Change the bulb wearing clean
gloves or using a clean and dry cloth.

Do not leave fingerprints on the
bulb, since these may cause its
overheating and consequent
breakage. If you touch the bulb with
bare hands, remove any fingerprint with
alcohol, in order to prevent it from blow-
ing frequently.
DO NOT FORCE THE ELECTRIC CA-
BLES

".