Dell POWEREDGE 1950 Hardware Owner's Manual page 22

Table 1-7. LCD Status Messages (continued)
Code Text
E2016 Int Controller
E2017 Timer Fail
E2018 Prog Timer
E2019 Parity Error
E201A SIO Err
E201B Kybd Controller
E201C SMI Init
E201D Shutdown Test
E201E POST Mem Test
E201F DRAC Config
E2020 CPU Config
E2021 Memory
Population
E2022 POST Fail
E2110 MBE Crd # DIMM ##
& ##
22
About Your System
Causes
Interrupt controller failure.
Timer refresh failure.
Programmable interval timer error. See "Getting Help" on page 125.
Parity error.
SIO failure.
Keyboard controller failure.
System management interrupt
(SMI) initialization failure.
BIOS shutdown test failure.
BIOS POST memory test failure.
Dell remote access controller
(DRAC) configuration failure.
CPU configuration failure.
Incorrect memory configuration.
Memory population order
incorrect.
General failure after video.
One of the DIMMs in the set
implicated by "## & ##" has had a
memory multi-bit error (MBE). If
no memory card is present, the
"Crd #" string is left out of the
message.
Corrective Actions
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Troubleshooting System
Memory" on page 102. If the
problem persists, see "Getting
Help" on page 125.
Check for specific error messages.
Ensure that DRAC cables and
connectors are properly seated. If
the problem persists, see your
DRAC documentation.
Check for specific error messages.
Check for specific error messages.
See "Troubleshooting System
Memory" on page 102.
Check for specific error messages.
See "Troubleshooting System
Memory" on page 102.