Dell POWEREDGE 1950 Hardware Owner's Manual page 19

Table 1-7. LCD Status Messages (continued)
Code Text
E1418 CPU # Presence
E141C CPU Mismatch
E141F CPU Protocol
E1420 CPU Bus PERR
E1421 CPU Init
E1422 CPU Machine Chk
E1610 PS # Missing
E1614 PS # Status
E1618 PS # Predictive
E161C PS # Input Lost
PS # Input Range Power source for specified power
E1620
Causes
Specified processor is missing or
bad, and the system is in an
unsupported configuration.
Processors are in a configuration
unsupported by Dell.
The system BIOS has reported a
processor protocol error.
The system BIOS has reported a
processor bus parity error.
The system BIOS has reported a
processor initialization error.
The system BIOS has reported a
machine check error.
No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty.
No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty.
Power supply voltage is out of
acceptable range; specified power
supply is improperly installed or
faulty.
Power source for specified power
supply is unavailable, or out of
acceptable range.
supply is unavailable, or out of
acceptable range.
Corrective Actions
See "Troubleshooting the
Microprocessors" on page 108.
See "System Memory" on page 63.
Ensure that your processors match
and conform to the type described
in the Microprocessor Technical
Specifications outlined in your
system's Getting Started Guide.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Getting Help" on page 125.
See "Troubleshooting Power
Supplies" on page 100.
See "Troubleshooting Power
Supplies" on page 100.
See "Troubleshooting Power
Supplies" on page 100.
Check the AC power source for the
specified power supply. If the
problem persists, see
"Troubleshooting Power Supplies"
on page 100.
Check the AC power source for the
specified power supply. If the
problem persists, see
"Troubleshooting Power Supplies"
on page 100.
About Your System
19