Table of Contents
Advertisement
REMOVING THE SIDE FAIRINGS
Carefully read p. 87 (MAINTENANCE).
WARNING
Before carrying out the following opera-
tions, let the engine and the exhaust si-
lencer cool down until they reach room
temperature.
Failure to observe this warning can lead
to serious burns.
◆
Place the vehicle on the stand, see p. 85
(PLACING THE VEHICLE ON THE
STAND).
◆
Unscrew and remove the three side
screws (1).
◆
Unscrew and remove the upper screw
(2).
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
◆
Remove the side fairing (3).
NOTE
Repeat these operations to re-
move the other side fairing (4).
Upon reassembly:
CAUTION
Correctly fit the seat (5) in the appropri-
ate pin and place the plastic elements
(6) (7) in their seats.
Tighten the screws only moderately. Be
careful not to over tighten the screws,
this will damage the surrounding plastic
and painted components.
use and maintenance ETV mille Caponord ABS
125
Hide quick links:
Advertisement
Table of Contents
