Configuring Dial Backup; Figure 79 Network > Wan > Traffic Redirect; Table 45 Network > Wan > Traffic Redirect - ZyXEL Communications ZYWALL 35 User Manual

For the ZyWALL 5, if the traffic redirect feature does not work after you
configure the ZyWALL's traffic redirect settings in the Traffic Redirect screen,
you may need to turn on the WAN ping check by entering sys rn
pingcheck in command interpreter. See
Figure 79 NETWORK > WAN > Traffic Redirect
The following table describes the labels in this screen.
Table 45 NETWORK > WAN > Traffic Redirect
LABEL
Active
Backup
Gateway IP
Address
Apply
Reset

8.15 Configuring Dial Backup

Click NETWORK > WAN > Dial Backup to display the Dial Backup screen. Use this
screen to configure the backup WAN dial-up connection. Not all fields are available on all
models.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 8 WAN Screens
Appendix L on page 801.
171