Inserting A Name Server Record; Figure 239 Advanced > Dns > Insert (Name Server Record); Table 148 Advanced > Dns > Add (Address Record) - ZyXEL Communications ZYWALL 35 User Manual

Internet security appliance

Hide thumbs Also See for ZYWALL 35:

Table of Contents

Chapter 25 DNS

The following table describes the labels in this screen.

Table 148 ADVANCED > DNS > Add (Address Record)

Enable Wildcard

25.6.2 Inserting a Name Server Record

Click Insert in the System screen to open this screen. Use this screen to insert a name server

record. A name server record contains a DNS server's IP address. The ZyWALL can query the

DNS server to resolve domain names for features like VPN, DDNS and the time server. A

domain zone may also be included. A domain zone is a fully qualified domain name without

the host. For example, zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully

qualified domain name.

Figure 239 ADVANCED > DNS > Insert (Name Server Record)

Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a

host name and continues all the way up to the top-level domain name. For

example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the

host, "zyxel" is the second-level domain, and "com.tw" is the top level domain.

If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports,

select WAN Interface and select WAN 1 or WAN 2 from the drop-down list box.

If this entry is for the WAN port on a ZyWALL with a single WAN port, select WAN

For entries that are not for the WAN port(s), select Custom and enter the IP

address of the host in dotted decimal notation.

Select the check box to enable DNS wildcard.

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

ZyWALL 5/35/70 Series User's Guide

Show Quick Links

Table of Contents