A
P P E N D I X
Brute-Force Password Guessing
Brute-force password guessing protection allows you to specify a wait-time that must expire
before entering a fourth password after three incorrect passwords have been entered.
The following describes the commands for enabling, disabling and configuring the brute-force
password guessing protection mechanism for the password. See
information on the command structure.
Table 297 Brute-Force Password Guessing Protection Commands
COMMAND
sys pwderrtm
sys pwderrtm 0
sys pwderrtm N
Example
sys pwderrtm 5
This command sets the password protection to block all access attempts for five minutes after
the third time an incorrect password is entered.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This command displays the brute-force guessing password protection settings.
This command turns off the password's protection from brute-force guessing. The
brute-force password guessing protection is turned off by default.
This command sets the password protection to block all access attempts for N (a
number from 1 to 60) minutes after the third time an incorrect password is entered.
N
Protection
Appendix L on page 801
for
813