Customize Weekly Report Screen; Table 89 Schedule Reports > Schedule Reports > Add (Daily Report) - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Vantage Report User's Guide
If you are using the standard version of Vantage Report, some reports are not available, so
these reports are disabled in this screen. Each field is described in the following table.
Table 89 Schedule Reports > Schedule Reports > Add (Daily Report)
LABEL
Destination E-mail
Address
E-mail Subject
E-mail Body
E-mail Attached Files Select this if you want Vantage Report to send the selected report(s) as
Save Directory
Report Type
Include All Data in a
Single Report
Report List
Apply
Reset
Cancel

10.3 Customize Weekly Report Screen

Note: To send scheduled reports by e-mail, you have to enter the SMTP mail server
settings. See
Note: Scheduled reports are limited by the amount of log and traffic information
stored in Vantage Report. For example, if Vantage Report saves three days of
information, weekly reports only consist of information from these three days,
not seven days. See
Note: This feature can send e-mail messages with very large attachments (2+ MB).
Some SMTP mail servers might not accept such large messages. In this case,
there is a way to send e-mail messages without the attachments. See the E-
mail Attached Files field for more information.
197
DESCRIPTION
Enter the e-mail address(es) to which Vantage Report sends the selected
report(s). Use a comma to separate each e-mail address. Do not put a space
after the comma. You can enter as many valid e-mail addresses as you want.
Vantage Report provides an auto-complete feature in this field. As you type, you
can see a list of values for this field in other scheduled reports next to the
mouse. You can click on one to avoid typing the rest of the value.
Enter the subject line in the e-mail message Vantage Report sends. The subject
must be 1-50 printable ASCII characters.
Vantage Report provides an auto-complete feature in this field. As you type, you
can see a list of values for this field in other scheduled reports next to the
mouse. You can click on one to avoid typing the rest of the value.
Enter the text you want to appear in the main body of the e-mail message
Vantage Report sends. The body must be 1-255 printable ASCII characters
long.
attachment(s). Vantage Report also saves the selected report(s) on the Vantage
Report server. If you do not select this, Vantage Report only saves the selected
report(s) on the Vantage Report server. These report(s) are stored in
data\schedule in the Vantage Report installation directory.
This field is read-only. Vantage Report saves a copy of the selected report(s) on
the Vantage Report server. This field displays where the copy is.
Select the format(s) of the selected report(s). HTML format looks like the
statistical reports you can see online.
This field is enabled for if you selected PDF format. Select this if you want to
combine all the selected report(s) into one file.
Select which report(s) you want to generate and send in the e-mail message.
For some reports, you can select additional options. All the bandwidth reports
use the same direction setting.
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved values.
Click this to close the screen without saving any changes.
section 11.2 on page 203
section 11.1 on page 202
for more information.
for more information.
Chapter 10 Schedule Report