Critical Log Viewer - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Table 86 Log Viewer > All Logs
LABEL
End Date
Category
Advanced Search
Source IP
Services
Destination IP
Protocol
Keyword
Port
Search
Reset
Time
Source:Port
Destination:Port
Category
Message
Total Count
Total Page
First .. Last
Go

9.2 Critical Log Viewer

Critical log entries are a subset of regular log entries. They are updated more frequently
because they are important and may require immediate attention. For example, critical log
entries include some messages in system maintenance, system errors, firewall access, TCP
reset, attack, PPP, IDP, anti-virus, and anti-spam. See
information about update frequencies for regular log entries and critical log entries. See
section 2.4 on page 28
Chapter 9 Log Viewer
DESCRIPTION
This field is enabled and required if you select Days. Enter the date of the latest
log entries you want to see. You cannot enter a date earlier than Start Date. You
can also click the Calendar icon to specify the date.
This field depends on the model of the selected ZyXEL device. Select what type
of log entries you want to see. You can also select All Categories.
This field is disabled if Category is All Categories. Select this if you want to use
other search criteria to look at log entries.
Enter the source IP address in the event that generated the log entry.
Select the service whose log entries you want to see. If you select [Custom
Service], you have to specify the Protocol and Port too.
Enter the destination IP address in the event that generated the log entry.
This field is enabled if Services is [Custom Service]. Select the protocol whose
log entries you want to see.
Enter part or all of any value you want to look for in the Message field. You can
use any printable ASCII character. The search is not case-sensitive.
This field is enabled if Services is [Custom Service]. Select the destination port
number whose log entries you want to see.
Click this to display the log entries based on the current search criteria.
Click this to set the search criteria to the values they had the last time you
clicked Search. If you have not clicked Search yet, the search criteria return to
their default values.
This field displays the time the Vantage Report server received the log entry, not
the time the log entry was generated.
This field displays the source IP address and port (if any) of the event that
generated the entry.
This field displays the destination IP address and port (if any) of the event that
generated the entry.
This field displays the type of log entry.
This field displays the reason the log entry was generated.
This field displays how many log entries there are for the specified search
criteria.
This field displays how many screens it takes to display all the log entries.
Click First, Last, or a specific page number to look at the records on that page.
Some choices are not available, depending on the number of pages.s
Enter the page number you want to see, and click Go.
for more information about the source data used by the report.
Vantage Report User's Guide
section 2.3 on page 27 for more
190