Antivirus; Virus Summary - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Vantage Report User's Guide
Table 57 Network Attack > Intrusion > By Severity > Drill-Down
LABEL
Intrusions
% of Intrusions
Total
Back

6.3 AntiVirus

Use these reports to look at viruses that were detected by the ZyXEL device's anti-virus
feature.
Note: To look at anti-virus reports, each ZyXEL device must record anti-virus
messages in its log. See the User's Guide for each ZyXEL device for more
information. In most devices, go to Logs > Log Settings, and make sure Anti-
Virus is enabled. Then, go to Anti-Virus > General. ZyXEL devices can log
viruses based on the Service the virus was using. Make sure the ZyXEL device
logs viruses you want to include in Vantage Report.

6.3.1 Virus Summary

Use this report to look at the number of virus occurrences by time interval.
Note: To look at anti-virus reports, each ZyXEL device must record anti-virus
messages in its log. See the User's Guide for each ZyXEL device for more
information. In most devices, go to Logs > Log Settings, and make sure Anti-
Virus is enabled. Then, go to Anti-Virus > General. ZyXEL devices can log
viruses based on the Service the virus was using. Make sure the ZyXEL device
logs viruses you want to include in Vantage Report.
Click Network Attack > AntiVirus > Summary to open this screen.
133
DESCRIPTION
This field displays the number of intrusions of the selected severity using each
intrusion signature.
This field displays what percentage of all intrusions of the selected severity was
made by each intrusion signature.
This entry displays the totals for the intrusion signatures above. If the number of
intrusion signatures of the selected severity is greater than the maximum
number of records displayed in this table, this total might be a little lower than
the total in the main report.
Click this to return to the main report.
Chapter 6 Network Attack